Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Temecula, CA
We clean, repair, and seal the duct systems connected to Lennox equipment throughout Temecula, including Redhawk, Harveston, Morgan Hill, and the neighborhoods east of the 15. Most Temecula Lennox owners call us because their system is blowing dust, running longer than it should, or struggling to hold temperature after a Santa Ana event. Getting the ducts and coil clean usually fixes it. If you’re seeing dust at the registers or your Lennox air handler sounds like it’s working harder than it used to, call (855) 341-7672 and we’ll take a look.
One thing worth saying up front: we’re an independent Lennox service provider. We’re not factory-authorized, and we don’t sell equipment. That independence is exactly why Temecula homeowners trust us with their Lennox systems. We diagnose the actual problem, not a brand story. If your ducts need cleaning, we clean them. If a coil needs attention, we clean that too. If your ductwork is leaking into the attic, we seal it. For broader Lennox equipment needs, our Lennox sales & service partners handle what we don’t. Our practice is built around one system: the air pathways inside your home. Clean ducts are the foundation of clean indoor air.
Why Temecula Residents Choose Us for Lennox Service
Duct specialists, not generalists. That’s the whole idea. Clay Gentry built Duct Cleaning Murrieta around a single trade because Lennox equipment, like any forced-air system, is only as good as the ductwork feeding it. Clay has lived in Murrieta since the mid-90s, back when the Promenade Mall was still under construction and half the streets off Murrieta Hot Springs Road were dirt. He learned the mechanical side of HVAC through the HVAC/R program at Mt. San Jacinto College in Menifee, then spent years doing residential and light-commercial duct work across the Temecula Valley, including Murrieta, before going out on his own. He got serious about indoor air quality after his youngest started having respiratory issues, nothing dramatic, just the kind of chronic sniffling that turns out to have a mechanical fix.
We run Rotobrush and Nikro systems, which are professional-grade duct-cleaning machines engineered for actual debris extraction. Not a shop vac and a hose. We also carry Abatement Technologies equipment for elevated contamination jobs, and we’re familiar with Honeywell and Aprilaire filtration systems, so we understand how premium IAQ equipment depends on clean duct pathways. When you hire us for a Lennox duct cleaning in Temecula, you get a crew that works on nothing but ducts and vents. That focus shows up in the result.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Temecula
- Builder-grade flexible duct runs that sag and kink. In tract-home communities like Redhawk and Harveston, original Lennox installs often used flexible ductwork with shallow pitch. Over time, it sags between supports. Airflow drops. Dust settles in the low spots and stays there. We see it constantly in Temecula’s master-planned neighborhoods.
- Lennox evaporator coils coated in fine reddish grit. After a Santa Ana wind event, that dust gets pulled into the return and lands on the coil. Heat transfer drops, the system runs longer, and your energy bill climbs. We clean the coil without damaging the fins.
- Older G Series furnaces with leaking metal ductwork. Homes with original G26 or G32 Lennox furnaces often have worn mastic seals at the plenum connections. Conditioned air leaks into the attic, and dusty attic air gets pulled in. We reseal those joints and clean the ducts.
- PSC blower wheels packed with debris. Older Merit Series air handlers use PSC blowers that collect dust on the wheel blades. Once the wheel is unbalanced, you get noise and reduced airflow. We clean the blower wheel as part of the service.
- Return ducts pulling dust from unconditioned spaces. In Temecula, return ducts in attics pull hot, dust-laden air whenever there’s a leak. We find and seal those leaks, then clean the return boot and grille so the air coming back into your Lennox unit is actually clean.
Lennox Service in Temecula: What Local Conditions Mean for Your Equipment
Here’s something specific to Temecula that changes how we approach Lennox duct cleaning. In master-planned communities like Harveston, the original Lennox systems were frequently installed with flexible ductwork that has a shallow pitch. This isn’t a Lennox problem, it’s an installation reality of fast-built tract housing. Shallow-pitch flex duct means dust settles and accumulates faster than in typical homes, because there’s not enough slope for gravity to help move particulates toward the return. Add a Santa Ana wind event, and you get a visible layer of fine reddish dust inside the return plenum and on the evaporator coil. We’ve seen it in homes on the east side near the wineries and open chaparral, where prevailing winds deposit grit that then recirculates through the whole house. For homeowners seeking French Valley Lennox service, the same wind patterns apply. For Lennox owners, that means your coil gets dirty faster, your blower wheel collects more debris, and your ducts hold dust in the low spots. Cleaning here is less about mold, more about dust and allergen load. If your Lennox system runs nearly year-round in Temecula’s hot summers, that dust isn’t sitting idle. It’s moving.
Lennox Models & Products We Service in Temecula
We work on the full range of Lennox residential equipment across Temecula. That includes the Merit Series (13ACX, ML14XC1), the Elite Series (EL16XC1, EL296V), and the Signature Collection (XC21, SL280V). We also service older G Series furnaces like the G26, G32, and G40. For critical components like control boards and blower motors, we use OEM Lennox parts when available. For duct sealing and repairs, we rely on high-quality aftermarket materials that meet or exceed original specs. We’ll give you an honest repair-vs-replace assessment. If your Lennox system is nearing end of life, we’ll say so, not pad the invoice.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Temecula
Duct cleaning pricing in Temecula depends on system size, access, and how much debris has accumulated. We quote per job, not per vent. You’ll get one flat price per system before any work starts, so there’s no bait-and-switch when the van pulls up. A free estimate includes inspecting the return plenum, supply trunk lines, and evaporator coil if accessible. We’ll tell you what’s actually in there, and what it’ll cost to get it out. Call (855) 341-7672 for an exact quote.
Serving Temecula, CA – Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Temecula
In Temecula, every 3 to 5 years is a realistic interval for most Lennox systems, and sooner if you’re near open chaparral or the wineries on the east side where Santa Ana winds deposit more grit. Homes with flexible ductwork in the attic and original builder-grade registers tend to accumulate dust faster, so if you can’t remember the last time your ducts were cleaned, that’s usually answer enough. Call (855) 341-7672 and we’ll inspect yours.
Yes. We use coil-cleaning methods designed for Lennox aluminum and copper coils, including the Signature Collection’s slab and A-coil configurations. The key is even pressure and the right cleaning agent. Temecula’s fine reddish dust tends to pack into the coil fins after Santa Ana events, and we remove it without bending or flattening the fins. It’s a routine part of our Lennox service.
Yes, we repair and reseal flexible ductwork. Sagging flex duct is one of the most common issues we find in Temecula tract homes, especially in Redhawk and Harveston, and we’ve handled similar Lennox repair in Wildomar for the same builder-grade installations. We re-support sagging runs, seal leaking connections with mastic, and replace sections that are kinked or collapsed. If the flex duct is original and deteriorating, we’ll tell you what replacement would cost versus continuing to patch it.
No. Duct cleaning, coil cleaning, and duct sealing do not void a Lennox equipment warranty. We don’t modify or open the sealed refrigerant system, and we don’t alter the unit’s internal components. We clean the air pathways and the accessible coil surface. If a repair requires opening the refrigerant circuit, that’s a job for a licensed HVAC contractor, not a duct cleaning company. We’ll tell you if that’s what’s needed.
In Temecula, musty smells usually come from accumulated dust and debris in the return plenum or on the evaporator coil, not from mold. When the coil gets coated with fine dust after Santa Ana winds, it can hold moisture during the cooling cycle and produce a stale or musty odor. We clean the return, the coil, and the supply ducts, and the smell typically goes away. Call (855) 341-7672 for a free estimate and we’ll find the source.
Service Areas Near Temecula
We serve Temecula and the surrounding communities across the Temecula Valley. If you’re in Murrieta, Menifee, Sun City, Lake Elsinore, or Wildomar, we can help. For Lennox-specific duct work in the neighboring cities, see our Temecula service area page, our Lennox service in Menifee page, or our Lennox service in Sun City page. Same specialized team, same professional-grade equipment.
Book Your Lennox Service in Temecula Today
If your Lennox system is blowing dust, running long, or making noise from the blower, the fix starts with clean ducts and a clean coil. Call (855) 341-7672 for a free estimate. We’ll tell you what’s in your ductwork and what it’ll take to get it out.
Written by Clay Gentry, Owner at Duct Cleaning Murrieta, serving Temecula, Murrieta, Fallbrook, and the Temecula Valley.